<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0" xmlns:atom="http://www.w3.org/2005/Atom" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:slash="http://purl.org/rss/1.0/modules/slash/">
  <channel>
    <title>Geothermal Loops</title>
    <description>It is all about the loop!</description>
    <pubDate>Wed, 14 Oct 2026 10:47:15 +0000</pubDate>
    <lastBuildDate>Wed, 14 Oct 2026 10:47:15 +0000</lastBuildDate>
    <generator>GeoExchange® Forum</generator>
    <link>https://www.geoexchange.org/forum/forums/geothermal-loops.178/</link>
    <atom:link rel="self" type="application/rss+xml" href="https://www.geoexchange.org/forum/forums/geothermal-loops.178/index.rss"/>
    <item>
      <title>Please Help Me Design a 2 unit Pond Loop</title>
      <pubDate>Fri, 10 Nov 2023 15:02:02 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/please-help-me-design-a-2-unit-pond-loop.8401/</link>
      <guid>https://www.geoexchange.org/forum/threads/please-help-me-design-a-2-unit-pond-loop.8401/</guid>
      <author>invalid@example.com (Mudyser)</author>
      <dc:creator>Mudyser</dc:creator>
      <content:encoded><![CDATA[Could you please help me with pipe sizing and let me know if I am trying to replace 2 Spit System heat pumps, one (4 ton and one 3 ton) with Geothermal units, can I use 1 loop for both units or would it be better for each unit to have its own loop? These are my conditions: Large Lake 75 miles long) Lake is 300ft away from house downhill with 10ft of water under the floating dock - elevation from house to Lake is 15ft below house level -<br />
<br />
<br />
I was planning on a closed loop system with Coils...<br />
<br />
<a href="https://www.geoexchange.org/forum/threads/please-help-me-design-a-2-unit-pond-loop.8401/" target="_blank" class="externalLink" rel="nofollow">Please Help Me Design a 2 unit Pond Loop</a>]]></content:encoded>
    </item>
    <item>
      <title>PEX a, B, or C</title>
      <pubDate>Sun, 04 Jun 2023 22:15:59 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/pex-a-b-or-c.8388/</link>
      <guid>https://www.geoexchange.org/forum/threads/pex-a-b-or-c.8388/</guid>
      <author>invalid@example.com (Wolfgang)</author>
      <dc:creator>Wolfgang</dc:creator>
      <content:encoded><![CDATA[I plan to use 3/4&quot; PEX tubing for my horizontal ground loop. PEX tubing comes in three different versions, PEX A, B, or C. Which version should I use?<br />
For heating applications, they recommend Oxygen barrier PEX tubing. Is this necessary for ground loops?]]></content:encoded>
      <slash:comments>1</slash:comments>
    </item>
    <item>
      <title>loops</title>
      <pubDate>Wed, 04 Jan 2023 21:08:52 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/loops.8355/</link>
      <guid>https://www.geoexchange.org/forum/threads/loops.8355/</guid>
      <author>invalid@example.com (Superchief)</author>
      <dc:creator>Superchief</dc:creator>
      <content:encoded><![CDATA[Considering geothermal for a 12 ton project in zone 4a but only if horizontal loops work out as vertical makes it cost prohibitive versus ASHP, but with the tax credit it could work if I can do horizontal loops professionally designed but installed with my crew which I can&#039;t do for horizontal.<br />
<br />
There is an unusual condition that makes this particularly attractive - I will already have a large excavator on site and I am already trenching and/or filling about 12000ft2 of area to depths up to...<br />
<br />
<a href="https://www.geoexchange.org/forum/threads/loops.8355/" target="_blank" class="externalLink" rel="nofollow">loops</a>]]></content:encoded>
      <slash:comments>3</slash:comments>
    </item>
    <item>
      <title>Underground Temp Sensors for Loops</title>
      <pubDate>Tue, 01 Nov 2022 23:52:54 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/underground-temp-sensors-for-loops.8350/</link>
      <guid>https://www.geoexchange.org/forum/threads/underground-temp-sensors-for-loops.8350/</guid>
      <author>invalid@example.com (mntnvew)</author>
      <dc:creator>mntnvew</dc:creator>
      <content:encoded><![CDATA[Has anyone installed temperature sensors when installing their loops so that they can gauge ground temperature post-installation?<br />
<br />
Any suggestions on the sensors themselves? Manufacture/type?<br />
<br />
I assume I will need to have them &quot;wired&quot; and thus installed now with the trenches opened.<br />
<br />
Thoughts?]]></content:encoded>
      <slash:comments>2</slash:comments>
    </item>
    <item>
      <title>Supply/Return header</title>
      <pubDate>Wed, 12 Oct 2022 20:37:11 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/supply-return-header.8346/</link>
      <guid>https://www.geoexchange.org/forum/threads/supply-return-header.8346/</guid>
      <author>invalid@example.com (mntnvew)</author>
      <dc:creator>mntnvew</dc:creator>
      <content:encoded><![CDATA[Have ~150’ each way to where the horizontal loop are.<br />
<br />
What do folks use for transitioning to/from the 3/4” loops from/to the 2” supply and return lines?<br />
<br />
If I cannot get a local contractor to do the heat fusion, I’ll purchase the tool. Definitely know I have to use this method for connecting all the pipe, especially since all connections will be buried.]]></content:encoded>
      <slash:comments>7</slash:comments>
    </item>
    <item>
      <title>Assemble/Fuse Loops Then Put Into Trenches</title>
      <pubDate>Mon, 26 Sep 2022 00:04:11 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/assemble-fuse-loops-then-put-into-trenches.8347/</link>
      <guid>https://www.geoexchange.org/forum/threads/assemble-fuse-loops-then-put-into-trenches.8347/</guid>
      <author>invalid@example.com (mntnvew)</author>
      <dc:creator>mntnvew</dc:creator>
      <content:encoded><![CDATA[Seven “down-and-back” loops, 600’ long, 10-11’ deep.<br />
<br />
No one is getting into any of these for obvious safety reasons.<br />
<br />
Does assembling and fusing the 3/4” into my 7-loop manifold above ground and then putting it into the trenches sound like a plausible idea? The supply and return will be roughly 140’ each way of 2”.<br />
<br />
The other option is digging a much wider spot for the manifold and make it stepped so it is safe to get into but that is MORE digging!<br />
<br />
Appreciate input!]]></content:encoded>
    </item>
    <item>
      <title>How do you know....</title>
      <pubDate>Sun, 18 Sep 2022 19:43:35 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/how-do-you-know.8345/</link>
      <guid>https://www.geoexchange.org/forum/threads/how-do-you-know.8345/</guid>
      <author>invalid@example.com (Neil Heuer)</author>
      <dc:creator>Neil Heuer</dc:creator>
      <content:encoded><![CDATA[How do you know if you have air in your line? And would that cause high temps?]]></content:encoded>
    </item>
    <item>
      <title>Loop penetration into house height question</title>
      <pubDate>Mon, 10 Aug 2020 16:12:04 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/loop-penetration-into-house-height-question.8006/</link>
      <guid>https://www.geoexchange.org/forum/threads/loop-penetration-into-house-height-question.8006/</guid>
      <author>invalid@example.com (Mike B)</author>
      <dc:creator>Mike B</dc:creator>
      <content:encoded><![CDATA[I currently have my closed loop coming into the house about 4-6ft below ground. I cant keep them from leaking and was wondering if I move them to a different location and bringing them back into the house around 2 ft below the surface. The distance of pipe at that height should be less than 24 inches. Will this have any affect on the cool or heating since it will be higher than the current configuration? Or will the water be moving to much to make a difference?<br />
Thanks,]]></content:encoded>
      <slash:comments>9</slash:comments>
    </item>
    <item>
      <title>Well drillers?  Have question on domestic water well!</title>
      <pubDate>Sun, 26 Apr 2020 17:50:51 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/well-drillers-have-question-on-domestic-water-well.8121/</link>
      <guid>https://www.geoexchange.org/forum/threads/well-drillers-have-question-on-domestic-water-well.8121/</guid>
      <author>invalid@example.com (fastline)</author>
      <dc:creator>fastline</dc:creator>
      <content:encoded><![CDATA[Hoping a few drillers are still hanging around?  Have some issues with a newer water well and looking for a little advise.  We drilled a new well on a very rural property a couple yrs ago.  I knew it would be dicey trying to get in a decent formation around here.  We ended up with nothing but clays/gray shale from 20-120ft.  We drilled to 120ft, and perf&#039;d from 20-120, top 20 is solid casing with bentonite plug.  10&quot; bore, 5&quot; casing, with gravel pack.  <br />
<br />
I initially started pumping the well...<br />
<br />
<a href="https://www.geoexchange.org/forum/threads/well-drillers-have-question-on-domestic-water-well.8121/" target="_blank" class="externalLink" rel="nofollow">Well drillers?  Have question on domestic water well!</a>]]></content:encoded>
      <slash:comments>2</slash:comments>
    </item>
    <item>
      <title>Can a garage be built over a segment of a geothermal loop?</title>
      <pubDate>Mon, 13 Apr 2020 22:42:48 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/can-a-garage-be-built-over-a-segment-of-a-geothermal-loop.6760/</link>
      <guid>https://www.geoexchange.org/forum/threads/can-a-garage-be-built-over-a-segment-of-a-geothermal-loop.6760/</guid>
      <author>invalid@example.com (Geostew227)</author>
      <dc:creator>Geostew227</dc:creator>
      <content:encoded><![CDATA[We would like to build a detached garage on our property. The best place to build it would be over a segment of the geothermal loop of our geothermal system. We have had the geothermal system for around six years. We would like to build a 24&#039; x 30&#039; garage with a concrete pad. The concrete pad would extend over a straight segment of the geothermal loop. The straight segment of the loop would run along about mid-way to two-thirds of the way toward the back of the garage. We would be parking...<br />
<br />
<a href="https://www.geoexchange.org/forum/threads/can-a-garage-be-built-over-a-segment-of-a-geothermal-loop.6760/" target="_blank" class="externalLink" rel="nofollow">Can a garage be built over a segment of a geothermal loop?</a>]]></content:encoded>
      <slash:comments>5</slash:comments>
    </item>
    <item>
      <title>Loop balancing</title>
      <pubDate>Sat, 22 Feb 2020 06:40:55 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/loop-balancing.8103/</link>
      <guid>https://www.geoexchange.org/forum/threads/loop-balancing.8103/</guid>
      <author>invalid@example.com (Danny313)</author>
      <dc:creator>Danny313</dc:creator>
      <content:encoded><![CDATA[Plan to install multiple slinky loops of various lengths to conform to an &quot;outside the rulebook&quot; application. There will probably be 3 different loop lengths.<br />
How to deal with this at the header?<br />
I&#039;m aware of the need to balance.]]></content:encoded>
      <slash:comments>4</slash:comments>
    </item>
    <item>
      <title>horizontal tubing size/length and wall penetration</title>
      <pubDate>Sun, 16 Feb 2020 05:20:36 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/horizontal-tubing-size-length-and-wall-penetration.8016/</link>
      <guid>https://www.geoexchange.org/forum/threads/horizontal-tubing-size-length-and-wall-penetration.8016/</guid>
      <author>invalid@example.com (Cary Budach)</author>
      <dc:creator>Cary Budach</dc:creator>
      <content:encoded><![CDATA[I&#039;ve had dozens of suggestions on the sizing of my geo loop.  I&#039;m going to run a 2-ton heatpump, single pump non-pressure flow center, and 3/4&quot; tubing, 2 runs of 700 feet each.  They&#039;ll be buried at 6&#039;, in a single trench, 16&quot; apart, 325 feet &#039;out&#039;, and a return trench 325 feet back.  We&#039;re in Kansas City, moderate winters, hot summers.  Mostly moist clay, very few other soil features.  Would you do a 2-loop horizontal for 2 tons, or go a bit extravagant and do 3 loops?  I only need 6...<br />
<br />
<a href="https://www.geoexchange.org/forum/threads/horizontal-tubing-size-length-and-wall-penetration.8016/" target="_blank" class="externalLink" rel="nofollow">horizontal tubing size/length and wall penetration</a>]]></content:encoded>
      <slash:comments>12</slash:comments>
    </item>
    <item>
      <title>Closed loop penetration through foundation wall question?</title>
      <pubDate>Sat, 08 Feb 2020 21:18:48 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/closed-loop-penetration-through-foundation-wall-question.8079/</link>
      <guid>https://www.geoexchange.org/forum/threads/closed-loop-penetration-through-foundation-wall-question.8079/</guid>
      <author>invalid@example.com (Danny313)</author>
      <dc:creator>Danny313</dc:creator>
      <content:encoded><![CDATA[Wanted to know if anyone was aware of a concrete wall penetration &quot;system&quot; that would allow for multiple pipes to penetrate through wall individually, at one location and do so hermetically.<br />
That would also provide for additional pipe entries at later date by opening up additional &quot;ports&quot; in system, placing pipe through and then tightening port around pipe?<br />
My thoughts go to Uponor who I thought had something similar but can&#039;t seem to locate again.<br />
I like this idea as it provides one local...<br />
<br />
<a href="https://www.geoexchange.org/forum/threads/closed-loop-penetration-through-foundation-wall-question.8079/" target="_blank" class="externalLink" rel="nofollow">Closed loop penetration through foundation wall question?</a>]]></content:encoded>
      <slash:comments>2</slash:comments>
    </item>
    <item>
      <title>best antifreeze</title>
      <pubDate>Fri, 07 Feb 2020 23:55:40 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/best-antifreeze.8096/</link>
      <guid>https://www.geoexchange.org/forum/threads/best-antifreeze.8096/</guid>
      <author>invalid@example.com (Gary Wilson)</author>
      <dc:creator>Gary Wilson</dc:creator>
      <content:encoded><![CDATA[hello- waterfurnace price sheet says they have a 5 bucket minimum, I just need 15 gallons, can anyone point me in the right direction? And, what type is best? Some say mehanol. Thanks]]></content:encoded>
      <slash:comments>4</slash:comments>
    </item>
    <item>
      <title>Any of you well drillers still hanging out here?</title>
      <pubDate>Wed, 29 Jan 2020 03:47:06 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/any-of-you-well-drillers-still-hanging-out-here.8088/</link>
      <guid>https://www.geoexchange.org/forum/threads/any-of-you-well-drillers-still-hanging-out-here.8088/</guid>
      <author>invalid@example.com (fastline)</author>
      <dc:creator>fastline</dc:creator>
      <content:encoded><![CDATA[First, I am NOT looking to compete with pros here for business.  I am working on a home built rig simply for production holes.  It has become apparent I might go broke paying the local drillers while trying to spot a suitable hole.  We can get more here than some I guess, and not one of them will be &quot;dry&quot;, but getting into a good formation will be nothing short of a guess, and I think good drillers know that.  I really want to move on this from the highly technical side, which is seismic...<br />
<br />
<a href="https://www.geoexchange.org/forum/threads/any-of-you-well-drillers-still-hanging-out-here.8088/" target="_blank" class="externalLink" rel="nofollow">Any of you well drillers still hanging out here?</a>]]></content:encoded>
      <slash:comments>2</slash:comments>
    </item>
    <item>
      <title>Horizontal Loop Under Gravel Driveway</title>
      <pubDate>Tue, 19 Nov 2019 02:50:25 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/horizontal-loop-under-gravel-driveway.8036/</link>
      <guid>https://www.geoexchange.org/forum/threads/horizontal-loop-under-gravel-driveway.8036/</guid>
      <author>invalid@example.com (Coz)</author>
      <dc:creator>Coz</dc:creator>
      <content:encoded><![CDATA[Hi everyone,<br />
<br />
Been reading the forums for a while here now actually, and have one question I can&#039;t seem to get a good answer on.<br />
<br />
We are currently designing out a site plan with our architect, and one of both our goals (and that of the HOA) is to not clear out more than the minimum number for trees for construction and safety. Lot is in a pine forest.<br />
<br />
To this end, it was suggested that a horizontal loop could be placed under the gravel driveway, prior to finishing the driveway. Possibly 5...<br />
<br />
<a href="https://www.geoexchange.org/forum/threads/horizontal-loop-under-gravel-driveway.8036/" target="_blank" class="externalLink" rel="nofollow">Horizontal Loop Under Gravel Driveway</a>]]></content:encoded>
      <slash:comments>5</slash:comments>
    </item>
    <item>
      <title>Vertical Geothermal Wells for Energy Storage and Removal</title>
      <pubDate>Wed, 12 Jun 2019 03:59:40 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/vertical-geothermal-wells-for-energy-storage-and-removal.7953/</link>
      <guid>https://www.geoexchange.org/forum/threads/vertical-geothermal-wells-for-energy-storage-and-removal.7953/</guid>
      <author>invalid@example.com (JoergK.)</author>
      <dc:creator>JoergK.</dc:creator>
      <content:encoded><![CDATA[Hello All,<br />
<br />
I am new to this forum and like to introduce myself.<br />
<br />
My name is Joerg and my location is southern Alberta, Canada. I follow the geothermal issue, heat pumps etc. for probably +40 years. Our economy is energy, gas, oil, coal and heating cost where relatively low but that has changed. Not necessarily the cost for the actual energy, but all the ransom money one has to pay to be on the grid. What I mean is paying 1/3 for actual energy purchased and 2/3 for hook-up and line fees....<br />
<br />
<a href="https://www.geoexchange.org/forum/threads/vertical-geothermal-wells-for-energy-storage-and-removal.7953/" target="_blank" class="externalLink" rel="nofollow">Vertical Geothermal Wells for Energy Storage and Removal</a>]]></content:encoded>
      <slash:comments>14</slash:comments>
    </item>
    <item>
      <title>Anyone have experience with the Honeywell RTH6500 thermostat?</title>
      <pubDate>Tue, 28 May 2019 17:29:54 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/anyone-have-experience-with-the-honeywell-rth6500-thermostat.7957/</link>
      <guid>https://www.geoexchange.org/forum/threads/anyone-have-experience-with-the-honeywell-rth6500-thermostat.7957/</guid>
      <author>invalid@example.com (kk4ej)</author>
      <dc:creator>kk4ej</dc:creator>
      <content:encoded><![CDATA[Was given one, thinking with the wifi option it would be handy on the geo...<br />
<br />
Anyone have experience with these? It has multiple stages for a heat pump, but like most manuals, its not very good at anything past the basics.<br />
<br />
Input appreciated.]]></content:encoded>
    </item>
    <item>
      <title>Horizontal closed loop what if question</title>
      <pubDate>Mon, 15 Apr 2019 15:46:41 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/horizontal-closed-loop-what-if-question.7940/</link>
      <guid>https://www.geoexchange.org/forum/threads/horizontal-closed-loop-what-if-question.7940/</guid>
      <author>invalid@example.com (kk4ej)</author>
      <dc:creator>kk4ej</dc:creator>
      <content:encoded><![CDATA[In exploring design and working with the loop link software, I am asking this just to learn more about the concepts....<br />
<br />
Lets assume a system has a loop design of 4 x 3/4&quot; x 700 ft loops. Other than the obvious answer of expense of pipe and digging, would adding a additional loop ( making 5 in total ) provide a better &quot;reserve&quot; to use versus using longer pipes, such as a 4 x 3/4&quot; x 800ft. It would reduce the flow in each pipe and provide a much larger area for exchange...<br />
<br />
In the software, I...<br />
<br />
<a href="https://www.geoexchange.org/forum/threads/horizontal-closed-loop-what-if-question.7940/" target="_blank" class="externalLink" rel="nofollow">Horizontal closed loop what if question</a>]]></content:encoded>
      <slash:comments>17</slash:comments>
    </item>
    <item>
      <title>2 existing water wells on property, would It make sense to even consider closed loop?</title>
      <pubDate>Thu, 03 Jan 2019 14:28:25 +0000</pubDate>
      <link>https://www.geoexchange.org/forum/threads/2-existing-water-wells-on-property-would-it-make-sense-to-even-consider-closed-loop.7791/</link>
      <guid>https://www.geoexchange.org/forum/threads/2-existing-water-wells-on-property-would-it-make-sense-to-even-consider-closed-loop.7791/</guid>
      <author>invalid@example.com (Raventai)</author>
      <dc:creator>Raventai</dc:creator>
      <content:encoded><![CDATA[Hello I am early in the planning phases of a geothermal install, trying to gather data to see if the added initial expense will make financial sense for my family.<br />
<br />
we have a 2K sq&#039; mobil home on 2.5 acres in north central Florida, the standard 20 year old air sourced 3 ton package heat pump has given up the ghost. we had quite unpleasant $300/month electric bills during the summer and with the death of that unit we have an opportunity to try do something about it.<br />
<br />
I have been aware of...<br />
<br />
<a href="https://www.geoexchange.org/forum/threads/2-existing-water-wells-on-property-would-it-make-sense-to-even-consider-closed-loop.7791/" target="_blank" class="externalLink" rel="nofollow">2 existing water wells on property, would It make sense to even consider closed loop?</a>]]></content:encoded>
      <slash:comments>4</slash:comments>
    </item>
  </channel>
</rss>
